Sub-Assembly D: Cutter Motor Mount Plate Assembly; Sub-Assembly E: Roller-Paper Hold Assembly - Epson TM-U950 Technical Manual

CONFIDENTIAL

Sub-assembly D: Cutter Motor Mount Plate Assembly

1. Mount the cutter motor gear onto the cutter motor.
2.* Hold the motor with the label facing up and insert it into the cutter motor mount place sub-
assembly. Turn it in the
3.* Mount the deceleration gear A and fasten it with the RE.

Sub-assembly E: Roller-Paper Hold Assembly

1. Mount the paper hold rollers onto the paper guide-assist.
2.* Pass the shaft-paper hold roller through the guides-paper assist and the paper hold rollers.
3. Clip the C rings onto the grooves on the shaft-paper hold roller.
5-12 Disassembly, Assembly, and Adjustments
direction and secure it with the screws.
Cutter motor mount plate sub-assembly
Rev. A