Duerkopp Adler 745-26 Service Instructions Manual page 81

6 7
Establishing free space at the hook
–
Tilt the machine head to the side.
–
Swing the support 8 down.
The nose 7 must be inserted into the hole on the frame.
–
Loosen screws 3 ( 4-off ).
–
Lay angle 2 with the gas-operated damper 4 down.
The support 8 holds the machine head in its position.
–
Remove oil baffle 6.
The hook is now freely accessible.
–
Attach oil baffle 6 again.
–
Attach angle 2 with the gas-operated damper 4 again and tighten
the screws 3 ( 4-off ) again.
–
Swing support 8 up.
–
Tilt the machine head down.
8
81