Cl. 745-26 And -28: Folder And Gripping Folder (Work Method B,D,F) - Duerkopp Adler 745-26 Service Instructions Manual

4. Cl. 745-26 u. -28: Folder and Gripping Folder (Work Method B,D,F)
1
2
16
For the unimpeded transport of the material and a flawless working of
the pocket opening, the folder and the cutting tools, as well as the
marker lights, must be aligned to the center of the pocket opening.
The incision of the center knife is seen as the center of the pocket
opening.
The reference line 2 was traced on the machine plate at the factory.
It runs at a clearance of 125 mm parallel to the center of the pocket
opening, that is, to the center knife incision.
With proper mounting, the folder 1 can be aligned from the reference
line to the center of the pocket opening.
Proper mounting of the folder:
–
Tighten mounting screw 3.
This results in the setting made at the factory.
The clearance from the stud 5 to the forward-lying needles should
be 88 mm for the work method B and D and 74 mm for the work
method F.
The angle support 4 should touch the arm head and secure the
position of the folder during the transport procedure.
X
3
4
5