Setting the swing cylinder
–
Set the stop 8 to max. swing movement.
–
Set stopper screw 6.
The fixed leg 12 of the flap nippers should not strike the
gripping folder.
–
Set stop 7.
The fixed leg 12 should lie approx. 2 mm below the placement
table 10.
–
Set the shock absorber 5.
When swung in the shock absorber should lie approx. 1 to 2 mm in
front of its stop.
Setting the flap nippers
–
Align leg 12.
For a uniform clamping the tip of the moveable leg 9 should make
contact with the fixed leg first.
–
Set the clamping force with the screw 11.
The nippers should just still securely close.
Setting the throttle valves
–
Set throttles 1, 2, 3 and 4.
All movement should be rapid but not jerky.
31