Duerkopp Adler 745-26 Service Instructions Manual page 58

141
58
2
10
180 - 220
Checking the precise position of the light markers
Light marker 2 (seam beginning):
–
At the controls turn on the forward positioning point.
–
Show the desired seam beginning with a chalk mark on the sewing
piece.
–
Position the sewing piece with the chalk mark at the forward
crosswise line of the light marker 2.
–
Start the sewing sequence.
The seam must begin at the chalk mark.
–
To correct: Realign the marker light 2 after loosening its bracket.
Light marker 4 (seam end):
–
At the controls turn on the rear positioning point.
–
Check the alignment of the light marker 4 for the seam end
analogously.
4
10