Assigning Default Plotter - Gerber HS750 Plus User Manual

8. Double-click on the control bar to exit the GSP Setup Menu.
The system returns to the
group and you can now access the HS750

Assigning Default Plotter

A default plotter can be assigned if more than one plotter is
connected to the
Note: There must be at least two plotter names in the Ready for
Plotting Box to select a default plotter. If only one plotter is
installed to the
automatically specified as the default plotter.
1. Highlight the name of the desired default plotter in the Plotters
Box.
2. Click on Preference. The Set Preferences Message Box
appears.
3. Click on OK. The name of the default plotter selected will
appear below the words Default Plotter .
4. Click on Continue. The screen returns to the GSP Setup
menu.
5. Double-click on the control bar to exit the GSP Setup menu.
The system returns to the
group.
GSP GRAPHIX ADVANTAGE
GRAPHIX ADVANTAGE
GRAPHIX ADVANTAGE
GSP GRAPHIX ADVANTAGE
Installation
program
plus
plotter.
.
system, that plotter is
program
17