Slew Keys - Gerber HS750 Plus User Manual

Slew Keys

Slew keys are the four keys surrounding the
Press the left and right slew keys to unroll material before plotting,
to position the tool for plotting, to position the carriage and
material between jobs, and to rotate the drum and feed material
through the plotter or back toward the roll holder.
Press the up or down slew keys to move the carriage between the
rear and the front of the plotter.
The slew and
!
!
!
SLOW
Use the
SLOW
permits you to move the drum or carriage one step at a time or
continuously at a very slow speed.
SLOW
keys do not function during the following:
SLOW
while a job is plotting
during an error condition
if a Run light is on, even if the plotter is idle.
key to access slow slew mode. Slow slew mode
SLOW
Operation 39
key.
SLOW