Delete Plotters; Assigning Default Plotter - Gerber HS15 Plus User Manual

plus
12 HS15
Deleting Plotters
To remove plotters from the system:
1. In the Ready for Plotting Box, click on the name of the plotter to be
deleted.
2. Click on Delete.

Assigning Default Plotter

A default plotter can be assigned if more than one plotter is connected to
the
GRAPHIX ADVANTAGE
Note: There must be plotter names in the Ready for Plotting Box to
select a default plotter. If only one plotter is installed to the
ADVANTAGE
plotter.
1. Highlight the name of the desired default plotter in the Plotters Box.
2. Click on Preference. The Set Preferences Message Box appears.
3. Click on OK. The name of the default plotter selected will appear
below the words Default Plotter.
4. Click on Continue. The screen returns to the GSP Setup menu.
5. Double-click on the control bar to exit the GSP Setup menu. The
system returns to the GSP
.
system, that plotter is automatically specified as the default
GRAPHIX ADVANTAGE
GRAPHIX
program group.