Determining Error Numbers - Gerber HS750 Plus User Manual

plus
52 HS750

DETERMINING ERROR NUMBERS

The number of beeps and blinking lights signify the type of error
that has occurred. Error conditions are assigned a 2-digit number.
The number is displayed by flashing lights and beeping, one digit
at a time. The
SINGLE
number of 25 is displayed by pressing
lights 2 times, and pressing
Follow the procedure below to find the number of the error.
1. Press the
beeping).
2. Press the
represent the "tens" error code number. (No beeps means that
the error message number falls between one and nine). The
Run lights flash the same number of times as the "tens" error
number. Press the
message, if needed.
3. Press the
represent the "ones" error code number. No beeps means that
there is no "ones" error number (a zero). The Run lights flash
the same number of times as the "ones" error number. Press
the
4. Press the
to the initial off-line status.
The following examples may help you to understand how to
determine your error number:
!
!
!
!
key displays the first (tens) digit; the
RUN CONT
key displays the second (ones) digit. For example, an error
RUN SINGLE ,
key to clear the error signal (continuous
RESET
key to hear the number of beeps which
RUN CONT
RUN CONT
key to hear the number of beeps which
RUN SINGLE
key again to repeat the message, if needed.
RUN SINGLE
key to clear the error display mode and return
RESET
If the key beeps twice and the
RUN CONT
beeps once, the error message code is 21.
If the key beeps once and the
RUN CONT
beeps twice, the error message code is 12.
If the key beeps once and the
RUN CONT
does not beep, the error message code is 10.
If the key does not beep and the
RUN CONT
key beeps eight times, the error message code is 8.
which flashes
RUN CONT,
which flashes 5 times.
key again to repeat the
RUN SINGLE
RUN SINGLE
RUN SINGLE
RUN SINGLE
RUN
key
key
key