Gerber HS750 Plus User Manual page 69

1. Turn off power at the plotter.
2. Remove all screws from the right lower cover and pull the
panel off.
To remove the logic and control boards
CAUTION: Static electricity is a serious threat to modern
integrated circuits. Before reaching into the interior of the
plotter or handling any components, touch any bare metal of
the plotter surface. This discharges any potentially harmful
static charge being carried.
1. Remove the center hold-down screw on the logic board.
2. Disconnect all connections: R902, R903, R904, R905, R906,
and R907.
3.
Plotter Adjustments 63