Z Way Bar/Y Lead Screw/Theta Way Bar/Front Guide Bar - Gerber HS750 Plus User Manual

plus
56 HS750

Z WAY BAR/Y LEAD SCREW/THETA WAY BAR/FRONT GUIDE BAR

Use a lint-free cloth to wipe any dust or debris from the Z way
!
bar, the Y lead screw, the theta way bar, and the front guide
bar. Move the carriage to gain access to the entire length of
these shafts.
Look for any vinyl pieces adhering to these parts. Use
!
isopropyl alcohol to clean excessively dirty parts.
Lubricate the Z way bar, the theta way bar, and the front guide
!
bar immediately after cleaning to prevent corrosion. Apply a
light oil (such as
Use a small amount of silicon spray on the Y lead screw by
!
spraying the silicon on a lint-free cloth and wiping the Y lead
screw. Do not spray directly on the Y lead screw .
) with a lint-free cloth.
3-IN-ONE