Cleaning Around The Print Head - Epson SureColor SC-F7000 User Manual

SC-F7000 Series User's Guide
Clean the parts in the following order.
(1) Print head
(2) Wiper
(3) Caps
(4) Wiper rail
Moving the Print Head
This section describes how to position the print head for
part cleaning.
c
Important:
Be sure to follow the steps below when positioning
the print head. Moving the print head manually
could cause malfunction.
Buttons that are used in the following settings
A
Confirm that the printer is on and press #.
The Maintenance menu will be displayed.
B
Use the d/u buttons to select Head
Maintenance and press the Z button.
C
Press the Z button to move the print head to the
cleaning position.
Maintenance
D
Open the maintenance covers at each end.

Cleaning Around the Print Head

Inspect the area around the print head and remove any
ink stains as described below.
A
Use a cleaning stick to wipe the areas of the print
head shown in the illustration.
c
Important:
Be sure to use a narrow cleaning stick to clean
between the nozzles (the four areas shown in
the illustration). Touching the nozzle surface
with the cleaning stick could damage the print
head.
54