Epson SureColor SC-F7000 User Manual page 41

SC-F7000 Series User's Guide
C
Loosen the left roll core holder locking screw and
remove the roll core holder from the roll.
D
Lower the roll onto the roll support.
E
To prevent the media from sliding off the roll,
support the roll at its right end.
F
Loosen the right roll core holder locking screw
and remove the roll core holder from the roll.
Basic Operations
G
Lower the roll onto the roll support.
Using the Optional Heavy Roll Auto
Take-up Reel Unit
This section explains how to remove media from the
take-up reel using a lifter.
The following types of lifter can be used.
❏ Fork or platform thickness: 28 mm or less
❏ Fork or platform can be lowered to approx. 190 mm
from the floor.
!
Caution:
❏ Because the media is heavy, it should not be
carried by one person. When loading or
removing the media, use at least two persons.
Using a lifter is recommended when handling
a media that is 40 kg or heavier.
❏ Follow the instructions in the manual when
loading media or roll cores or removing media
from the take-up roll.
Dropping media, roll cores, or take-up rolls
could result in injury.
A
Cut the media and roll the cut end onto the
take-up reel.
"Cutting Media" on page 34
U
41