Table of Contents
Advertisement
SC-F7000 Series
User's Guide
H
Rotate the handle until part A in the illustration
below is fully inserted.
c
Important:
Once part A is hidden, do not turn the handle
any further. Failure to observe this precaution
could damage the roll holder.
If part A is not hidden even after turning the
handle until it can no longer be turned, return
to step 6 and fully press the right unit into the
roll core.
I
Raise the media loading lever.
Basic Operations
J
Pull out the media and insert it into the printer.
Note:
Media that is heavy and difficult to unroll can be
fed by pressing the drive switch on the left roll
holder.
Printable Side Out
Printable Side In
K
Insert the media past the pressure rollers and
lower the media loading lever to hold it in place.
Confirm that the left edge of the media passes
over the center of the square in the label on the
loading guide.
c
Important:
Perform Steps 11 to 3 in reverse order and
repeat the loading process if the left edge of the
media is not within the guides. Do not
attempt to reposition the roll holders while
they are inserted in the media.
30
Advertisement
Table of Contents
