Cleaning Around The Print Head - Epson SC-F9400H Series Operator's Manual

SC-F9400H Series/SC-F9400 Series Operator's Guide
Note:
The buzzer sounds 10 minutes after the print head is
moved (default setting). Press the Z button to continue
cleaning. After 10 more minutes have passed, the buzzer
sounds again.

Cleaning Around the Print Head

If you notice any ink clots, lint, or dust when checking
the area around the print head, clean the area by
following the steps below.
Before starting this procedure, be sure to read the
following:
"Precautions regarding maintenance" on page 31
U
A
Check that the print head has moved to the left
end of the printer, and then open the left-side
maintenance cover.
B
Dampen the cleaning stick with ink cleaner.
Use new products for both the cleaning stick and
ink cleaner.
"Using the ink cleaner" on page 33
U
Maintenance
c
Important:
❏ Rinse a cleaning stick using ink cleaner for
each step.
❏ After removing a clot of ink with a
cleaning stick, wipe off using a clean-room
wiper.
C
Wipe off any adhered ink, lint, and dust from the
parts that are indicated by the arrows below.
Wipe around both printheads.
D
Wipe off any adhered ink, lint, and dust from the
parts that are indicated by
E
Wipe off any adhered ink, lint, and dust from the
parts that are indicated by
35
below.
below.