SC-F7000 Series
User's Guide
D
Flip the Auto switch to
E
Lower the tensioner.
Basic Operations
F
.
G
Clockwise Take Up
A
38
Confirm that the media is attached without
deformation.
As shown in the identified sections in the
illustration below, if the tensions of the left and
right edges of the media are different, the media
cannot be taken up correctly. If there is slack on
one side, repeat from Step 1.
Note:
As shown in the illustration below, you can confirm
differences in tension by lightly tapping on both
edges of the media.
Press the d button to feed the media until the
take up roll core begins to turn.
c
Important:
The auto take-up reel unit will not function if
the tensioner is raised.
Attach the media to the take up roll core.
Tape the media to the take up roll core in the
center and then at the left and right edges.