Table of Contents
Advertisement
SC-F7000 Series
User's Guide
❏ Feed Speed
For more information on these items, see U
Media Setup Menu" on page
Saving Settings
Follow the steps below to save media settings.
Buttons that are used in the following settings
Choosing a Media Setting Bank
A
After confirming that the printer is ready, press
the Menu button.
The settings menu will be displayed.
B
Select Media Setup and press the Z button.
C
Use the d/u buttons to select Customize
Settings and press the Z button.
D
Use the d/u buttons to select a media setting
bank number between 1 and 30 and then press
the Z button.
Note that any settings already saved in the printer
will be overwritten.
Basic Operations
"The
70.
Setting Name
Name the media setting bank. Using distinctive names
makes it easier to select banks for use.
A
Select Setting Name and press the Z button.
B
Use the d/u buttons to display letters and
symbols. When the desired character is
displayed, press the r button to select the next
entry position.
Mistakes can be erased by pressing the l button
to delete the previous character and move the
cursor back one spot.
C
After entering the name, press the Z button.
Feed Adjustment
Feed Adjustment is used to correct banding (horizontal
banding, lines, or strips of uneven color).
For Feed Adjustment, the user visually inspects print
results and enters the adjustment value by hand.
See the following for details
"Feed Adjustment" on page 46
U
Platen Gap
Adjust the platen gap (the gap between the print head
and the media) if print results are smudged.
A
Use the d/u buttons to select Platen Gap and
press the Z button.
B
Use the d/u buttons to select the desired setting
and press the Z button.
C
Press the y button to return to the customize
settings menu.
c
Important:
Select 2.5 only if print results are still smudged
when 2.0 is selected. Choosing a larger gap than
required may result in ink stains inside the printer,
reduced print quality, or shorter product life.
43
Advertisement
Table of Contents
