Table of Contents
Advertisement
SC-F7000 Series
User's Guide
Performing Feed Adjustment
During Printing
Buttons that are used in the following settings
A
Press the
button during printing.
B
An adjustment value will be displayed. Use the
d/u buttons to select a value.
If the feed amount is too small, black bands (dark
stripes) will appear; adjust the feed amount
upwards.
If, in contrast, the feed amount is too large, white
bands (pale stripes) will appear; adjust the feed
amount downwards.
C
If you are not satisfied with the results, use the
d/u buttons to enter an adjustment value.
D
Press the Z button when settings are complete.
Once the feed amount has been adjusted,
printing will continue at the new value.
Note:
The new value is erased when:
❏ The media loading lever is raised
❏ The printer is turned off
❏ Changes are made to Feed Adjustment in the
Media Setup menu.
Basic Operations
Printable area
The gray area in the illustration below shows the
printable area. The arrow indicates the feed direction.
The positions of items
A
(right edge of media)
Varies with the option selected for Media Size
Check.
On selected for Media Size Check: The right edge of
the media.
Off selected for Media Size Check: The default right
edge reference position (as far as the platen past the
center of the label on the loading guide).
B
(left edge of media)
Varies with the option selected for Media Size
Check.
On selected for Media Size Check: The left edge of
the media.
Off selected for Media Size Check: 64 inches from
the right edge reference position.
48
A
B
to
are as follows:
Advertisement
Table of Contents
