SC-F7000 Series
User's Guide
When attaching on the left and right, attach using
tape while pulling the media straight down.
B
Press the d button in the control panel to feed
enough media for a single wrap around the roll
core.
C
Flip the Auto switch to Off and press the Manual
switch to
to wrap the media once around
the roll core.
Basic Operations
c
Important:
Confirm that edges of media taken up on the
roll core are not misaligned. If the edges are
misaligned, the media that follows cannot be
taken up correctly. When the edges are
misaligned, press the Manual switch to the
and then repeat from Step 1.
D
Flip the Auto switch to
39
side, rewind the media, remove the tape,
.