Epson SureColor SC-F7000 User Manual page 74

SC-F7000 Series User's Guide
Item
Print Start Position
Media Size Check
Media End Check
Media Skew Check
Print Nozzle Pattern
Periodical Cleaning
Light
Medium
Heavy
Power
Cleaning Cycle
Using the Control Panel Menu
Parameter Explanation
0 to 800 mm (0.00 Adjust this parameter if you want to print from the near center of the
to 32.00 inch) media or if you want to shift the printed area left from the Side
Margin(Right) setting. The area between the right edge of the media and
Print Start Position is left blank. If a value is selected for Side
Margin(Right), an additional area corresponding to the width selected
for Side Margin(Right) will be left blank. See the following for more
information.
"Printable area" on page 48
U
On
Choose whether the printer automatically detects (On), or does not
automatically detect (Off), the edges of the media. Try Off if the printer
Off
displays a Media Size Error when the media is correctly loaded. Note,
however, that the printer may print beyond the edges of the media when
Off is selected. Ink used outside the edges of the media will stain the inside
of the printer. We generally recommend to operate with this setting set to
On.
On Choose whether the printer automatically detects (On) or does not
automatically detect (Off), the end of the media. Try Off if the printer
Off
displays Media Out when the media is correctly loaded. We generally
recommend to operate with this setting set to On.
On When skewed media is detected, the printer will either stop printing and
display an error (On) or continue printing (Off). On is recommended in
Off
most circumstances, as skewed media may cause the printer to jam.
Off Choose the frequency with which the printer prints a nozzle test pattern:
never (Off) or once every 1 to 10 pages. Periodic test patterns will not be
1 to 10 pages
printed while Off is selected. To print a test pattern at the top of every 1 to
10 pages, select an option between 1 and 10. When printing is complete,
you can visually inspect the pattern to determine whether there may be
faint or missing colors in the preceding or following printout.
Off/1 to 240 hours Choose the frequency—never (Off) or after 1 to 240 hours—and strength
with which the printer performs head cleaning. Periodical Cleaning will
not be performed while Off is selected. If a value between 1 and 240 hours
is selected, auto head cleaning will be performed after the specified
number of hours. If printing is in progress or the printer is in sleep mode
when the specified time has elapsed, Periodical Cleaning will only be
performed after printing is complete or the printer is reactivated.
The following reset the timer:
❏
Turning the printer on.
❏
Choosing another option for this item.
❏
Manually performing head cleaning using All Nozzles.
Note that even when Off is selected for Periodical Cleaning, the printer will
automatically clean the print head at a fixed interval after printing to keep
the nozzle from clogging.
Off Choose the frequency with which the printer performs auto head
cleaning: never (Off) or once every 1 to 10 pages. The Cleaning Cycle will
1 to 10 pages
not be performed while Off is selected. Select 1 to 10 to perform head
cleaning before the specified number of pages is printed.
74