SC-F7000 Series
User's Guide
Printer Parts
Front
A
Maintenance cover (left)
Open this cover to clean the area around the print head. Normally closed when using the printer.
"Cleaning Around the Print Head" on page 54
U
B
Eject guide
Media is ejected along this guide.
C
Roll core holder
Place the used roll core for media take-up on these holders. There are two holders: one on the left and one on the
right.
"Media Loading and Take Up" on page 35
U
D
Tensioner
The tensioner maintains tension to prevent the media sagging as it is taken up.
E
Roll core holder locking screw
The locking screws keep the roll core holders in place once they have been attached to the roll core. There are two
screws: one on the left and one on the right.
Introduction
7