Redialing When the Line Is Busy
There are two methods of redialing: manual and automatic.
Manual Redialing
Press [Redial/Pause] to dial the last number you dialed with the numeric keys.
3
(This starts redialing regardless of whether automatic redialing is enabled.)
Canceling Manual Redialing
To cancel manual redialing, press [Stop/Reset].
Automatic Redialing
If the other party's line is busy or if there is no answer, the machine waits two
minutes, then tries to dial the same number again. This feature is called
automatic redialing.
After the initial dial attempt, the machine waits two minutes and tries to dial
again. If the second attempt fails, the machine waits for two more minutes, and
then makes the third (final) attempt to complete the call. (These are the default
settings.)
You can adjust the number of redialing attempts and the time interval between
attempts by changing the settings in <AUTO REDIAL>. Automatic redialing can
also be turned off and on. (See "TX Settings," on p. 6-9.)
If all attempts are unsuccessful, the machine cancels the transmission and prints
an ERROR TX REPORT. (See "TX (Transmission) REPORT," on p. 7-5.)
3-16
Redialing When the Line Is Busy