Color Management Resource Transform Support; Submitting Job Using Transforms For Color Management - Ricoh InfoPrint Pro C900AFP Manual

4. White space before and after parameter data is removed.
5. Parameter data on successive lines is concatenated with a single space between
6. Parameters can span lines as long as they follow rules 1 through 5.
These are the common tasks you must do when using the XML to PDF transform:
1. Create the XML Extender configuration file, xml2pdf.cfg, which lets you
2. Edit the file using your preferred editor.

Color management resource transform support

InfoPrint Manager enables these transforms to do color management:
v ps2afp
v jpeg2afp
v tiff2afp
v gif2afp
Note: The PCL and SAP transform do not support color management.
Transforms capable of color management allows the specification of color resource
information at job submission time and the implementation of color management
at the transform level within InfoPrint Manager. This support will provide color
fidelity with better printer performance.

Submitting job using transforms for color management

Before you use transforms to do color management, make sure that you have
installed the ICC Profiles using the Resource Installer into the Resource library as
Color Management Resources (CMRs). For more information, see "Color
management resources" on page 231 and "InfoPrint AFP Resource Installer" on
page 244.
Notes:
v You can specify the ICC Profile directly in a pure PS/PDF transform.
v Only audit color conversion, instruction color conversion, and link color
To submit a job:
204
InfoPrint Manager for Windows: Procedures
them.
configure XML Extender. To create the file:
v Use Windows commands to copy the sample configuration file,
install_path|xmltransform\samples\xml2pdf.cfg, to install_path\
xmltransform\xml2pdf.cfg:
copy install_path\xml2afp\samples\xml2pdf.cfg install_path\xml2afp\xml2pdf.cfg
Note: To modify the sample configuration file, you still need to copy it.
conversion CMRs are supported.
1. Select your destination printer.
2. Right-click and select Job and Document Defaults.
3. Click Modify.
4. Click Document AFP Color. If this tab is not visible, click Show more and
then select Document AFP Color.