Sample Notifyd_Error.cfg File Provided By; Infoprint Manager - Ricoh InfoPrint Pro C900AFP Manual

#
# Error Log Configuration File
#
log-size = 1024
log-wrap = true
log-severity = debug
log-backup-number = 10
Figure 2. Sample notifyd_error.cfg file provided by InfoPrint Manager
4. Once you have finished defining your options, save and close the file.
5. To stop the Notification server on an InfoPrint Windows server:
6. To restart the Notification server on an InfoPrint Windows server:
InfoPrint Manager for Windows only saved one backup error log.
When you start the InfoPrint Manager server after a shut down, it backs up the
first error log by creating an error.log.BAK file. With each successive restart, it
creates an additional .BAK file, adding a timestamp as a fourth qualifier. By
default, the log-backup-number attribute specifies a value of 10, meaning that
you can have nine back up files with timestamps and the initial .BAK file. You
can reduce this number as low as 1 or increase it as high as 999.
For a complete list of the error log attributes that you can customize, see the
InfoPrint Manager: Reference "Attributes for logs" topic in "Chapter 3. InfoPrint
object attributes."
Note: If you do not need the customization change to take effect immediately,
you can skip the final two steps and just wait until the next time the InfoPrint
Manager server is restarted.
a. Click Start → Settings → Control Panel → Services.
b. Highlight InfoPrint Manager Notification and click Stop.
a. Click Start → Settings → Control Panel → Services.
b. Highlight InfoPrint Manager Notification and click Start.
Chapter 8. Customizing error logs in the InfoPrint Manager Windows server
35