Ricoh InfoPrint Pro C900AFP Manual page 184

DEST=NTPRT1
IPADDR=dept01.myststem
PORTNUM=5002
RETRYNUM=3
RETRYINTV=60
We have decided this about the configuration:
v Leave the existing MVS Download receiver (on our Windows system) alone.
v Create a new receiver to processes the AFP resources, but continue using the
v Pass only the AFP resource name, not the directory path for it to be stored in.
v Use the FORMS keyword to identify the job as an AFP resource since the Routing
v Use the NAME JCL keyword to identify the AFP resource name.
In the JCL job for putting modified AFP resources on the spool, we have an
OUTPUT statement with:
OUTPUT
No changes to the JES inish deck are required since the MVS Download FSA
already receives jobs with DEST=NTPRT1.
We change the routing control file as follows to send this job to a separate receiver
and to prefix these resources with no length field. Jobs that do not have
FORMS=AFPRES would continue to be sent to the existing receiver.
DEST=NTPRT1
FORMS=AFPRES
IPADDR=dept01.mysystem
PORTNUM=5003
SEND_REC_LENGTH=NO
RETRYNUM=3
RETRYINTV=60
DEST=NTPRT1
IPADDR=dept01.myststem
PORTNUM=5002
RETRYNUM=3
RETRYINTV=60
Now we need to define a new receiver on the dept01.mysystem machine. The new
receiver will use port number 5003 (as identified in the routing control statement),
a modified DCF, and a user-written Exit.
We make a copy of the supplied DCF and modify it to change the mapping of the
NAME keyword from MVS. The existing statement:
NAME
would be changed to:
NAME
Also, the existing statement that maps DEST to target-destination-name would be
commented out as follows:
* DEST
Due to this change in the DCF, the Exit will now receive the AFP resource name as
the third passed parameter.
166
InfoPrint Manager for Windows: Procedures
existing MVS Download FSA.
Control Statements can use FORMS to direct files to different receivers.
DEST=NTPRT1,FORMS=AFPRES,NAME='C0MYFNT.300',....
:: name-text
:: target-destination-name
:: target-destination-name