Ricoh InfoPrint Pro C900AFP Manual page 203

#img2afp InfoPrint 4000-708 configuration file
a=fs10
respath=.:/usr/lpp/psf/config
thresh=4000-708.ibm106lpi.ta.ps
gcorr=4000-708.ibm106lpi.tf.dt.ps
pagetype=page
v=yes
r=600
On an InfoPrint Manager for Windows server, the respath value should be set to
the path where the img2afp configuration files is located in: install_path\config
where install_path is the fully qualified path where InfoPrint Manager for Windows
is installed on your system.
In each device-specific configuration file, only the thresh and gcorr values change
img2afp.cfg files observe these basic rules:
Note:
1. Any item specified in a configuration file can be overridden on the command
line.
2. Configuration file syntax is attribute = value.
3. A hash mark (#) indicates a comment to the end of the line.
4. All attribute names are the same as the command-line names.
5. For options that do not take values, you must type yes in the configuration file
(as shown below).
#sample img2afp configuration file
v = yes #equivalent to -v flag
a = fs10 #bilevel output
To invoke the transform from the command line, you must specify at least:
v -a fs10 to indicate bilevel output .
v -thresh {name} to specify the PostScript level 3 halftone dictionary that you are
using.
When you install some printers with InfoPrint Manager, the product makes
PostScript level 3 halftone dictionaries available on your server. For example, on
a Windows server an InfoPrint HD1-HD2, HD3-HD4, HD5-HD6, HS1, HS3,
MD1-MD2, MS1. PS-1, or PD1-PD2 4100 printer provides these:
– c:\Program Files\IBM\InfoPrint Manager\config\4100.ibm71lpi.ta.ps
– c:\Program Files\IBM\InfoPrint Manager\config\4100.ibm71lpirot90.ta.ps
– c:\Program Files\IBM\InfoPrint Manager\config\4100.ibm85lpi.ta.ps
– c:\Program Files\IBM\InfoPrint Manager\config\4100.ibm85lpirot90.ta.ps
– c:\Program Files\IBM\InfoPrint Manager\config\4100.ibm106lpi.ta.ps
– c:\Program Files\IBM\InfoPrint Manager\config\4100.ibm106lpirot90.ta.ps
– c:\Program Files\IBM\InfoPrint Manager\config\4100.ibm141lpi.ta.ps
– c:\Program Files\IBM\InfoPrint Manager\config\4100.ibm141lpirot90.ta.ps
v -gcorr filename to specify grayscale mapping tables to halftone the grayscale and
color images to bilevel for output.
Chapter 23. Working with transforms
185