Special Mvs_Parameters - Ricoh InfoPrint Pro C900AFP Manual

control: A control is a symbol that is used for delineation and which can also tell
the MVS Download receiver what it has to do to the mvs_keyword if it converts
the mvs_keyword to an InfoPrint keyword. Every Mapping statement contains a
control. Some of the controls listed below are used in the mvsdmap.txt file.
::
:+
:-
:!
Note: In Control Statements, mvs_definitions, controls, and infoprint_definitions
themselves cannot contain any white space (spaces or tabs). The first occurrence of
white space separates the mvs_definition from the control and the second separates
the control from the infoprint_definition. As a result, if the elements contain white
spaces, the DCF will not complete the mapping correctly.
Controls behave differently in the different types of Control statements.
v In Default statements, you cannot specify a control.
v In Global statements, you must specify a control, but the operator is only
v In Mapping statements, you must specify a control.
infoprint_definition: The infoprint_definition identifies the attribute and parameter
that will be specified on the pdpr command when InfoPrint Manager sends the job
to the printer. The infoprint_definition identifies an InfoPrint attribute and
(optionally) the value that it should be set to. infoprint_definitions follow this
syntax:
infoprint_attribute[=infoprint_parameter]
Note: In Control Statements, mvs_definitions, controls, and infoprint_definitions
themselves cannot contain any white space (spaces or tabs). The first occurrence of
white space separates the mvs_definition from the control and the second separates
the control from the infoprint_definition. As a result, if the elements contain white
spaces, the DCF will not complete the mapping correctly.
The infoprint_attribute is the InfoPrint attribute name as it is listed in the
InfoPrint Manager: Reference under –x options, plus the specially recognized
target-destination-name, which is used to identify the –p option of the pdpr
command. The infoprint_parameter is the value that is assigned to that attribute.
infoprint_definitions work differently in each kind of control statement.
v In Default statements, you cannot specify an infoprint_definition.
v In Global statements, you must specify an infoprint_definition.
154
InfoPrint Manager for Windows: Procedures
Table 12. Special mvs_parameters (continued)
mvs_keyword
RESFMT
TRC
Do not do any special processing. (Standard delineation)
Change all of the characters in the mvs_parameter into uppercase when
converting it to an infoprint_parameter.
Change all of the characters in the mvs_parameter into lowercase when
converting it to an infoprint_parameter.
Do not convert this mvs_parameter into an infoprint_parameter. This control
is only necessary if no infoprint_parameter is specified on this statement.
recognized as a delineator; no matter what operator you use, it acts like the ::
control.
mvs_parameters
P240 P300
YES NO