Ricoh InfoPrint Pro C900AFP Manual page 365

Table 51. 2–up duplex print job: front and back views (continued)
Last sheet
Since you have to start printing this job at the first page on the front side, you
can choose page one or page five (or any other page that would fall in that
position). If you choose a different page, the sequence of pages will be wrong,
and the job won't print correctly.
However, there is a way to avoid this situation. You can choose a sheet range
specifying the first and the last sheet that you want to print.
To define the sheet range:
a. Go to Job -> Properties -> Show more.
b. Click on the Job Other tab.
c. Enter a number range in the fields provided under the Sheet range
section.
d. Click on the Add button to insert new ranges in the values list field on the
right.
Note: You can specify up to 10 sheet-ranges to be printed. If you specify more
than 10 sheet-ranges, no sheets print and InfoPrint issues an error.
4. Decide what page you want to stop printing on (if you do not want to print
all the way to the end of the job).
You do not have to be as precise on the last page to print; the last page can be
in any location on the sheet of paper.
5. Select the job you want to print.
6. With the job selected, click Job → Change Page Range to Process.
If you do not see the Change Page Range to Process item in the Job menu,
use Add/Remove Menu Items to add it.
7. In the Change Page Range to Process dialog, select Range of Pages and type
the start page and end page you decided above.
Note: If you submitted this job using Distributed Print Facility (DPF),
InfoPrint Manager ignores the end page that you specify. DPF jobs always
print from the start page you specify to the end of the job.
8. Click OK.
Before you continue:
You should only move a job to an InfoPrint printer that uses the same
destination support system (DSS) as the one the job was originally submitted
to. If you move the job to a printer that uses a different DSS and the new
printer does not support all of the attributes of the job, the job will fail to
print. To check which DSS your InfoPrint printer uses:
a. Select the printer in the tree view of the Main window of the InfoPrint
Manager GUI.
Front of sheet
page n-3 page n-1
Chapter 34. General Operator and User Procedures
Back of sheet
page n page n-2
347