Setting Up A Default Mvs Download Configuration - Ricoh InfoPrint Pro C900AFP Manual

4. You will not use the multiple data set function of MVS Download.
If you do not meet all of the criteria, you will need to modify the DCF, the Exit, or
both. Some of the reasons that you would need to modify the DCF are:
1. You want to use alternate attributes or no attributes for some mvs_keywords.
2. You do not want the DCF to change the DEST value it receives to lowercase.
3. You want to use InfoPrint job scheduling based on media type.
4. You see that some of the MVS to InfoPrint mappings in the sample DCF are not
5. You want to identify MVS job defaults that are not communicated from MVS
6. You want to identify InfoPrint submission parameters to use on all jobs (for
7. You use the multiple data set function of MVS Download.
See these sections for instructions on modifying your DCF and Exit, and creating
an MVS Download receiver:
v "Understanding and using the MVS Download destination control file" on page
v "Understanding the MVS Download Exit Program" on page 159
v "Creating an MVS Download Receiver" on page 161

Setting up a default MVS Download configuration

Once you have made your resources available, the only tasks you need to do on
your Windows system to set up a Default configuration are:
v Create an InfoPrint destination.
v Create and configure an MVS Download receiver that uses the default DCF and
Creating an MVS Download Receiver for a default configuration
Before you can begin sending jobs from the MVS JES spool to InfoPrint Manager
through the MVS Download feature, follow this procedure to set up an MVS
Download Receiver:
1. Open the InfoPrint Manager Management Console.
2. Left-click the MVS Download Receiver item in the left pane to select it.
3. Right-click the MVS Download Receiver item in the left pane to open a
4. In the menu that pops up, select New.
5. Fill in the fields according to these specifications. For more information about
148
InfoPrint Manager for Windows: Procedures
what you want.
(for example PAGEDEF).
example, the font resource directory on your Windows system).
149
For information about creating destinations, see the InfoPrint Manager for
Windows: Getting Started.
Exit to send print jobs to that destination.
For instructions, see "Creating an MVS Download Receiver for a default
configuration."
pop-up menu.
The Add MVS Receiver dialog opens.
the dialog and the fields it contains, see the Management Console online help.
v Port Number: Enter the port number that you want this receiver to use when
it communicates with the host system. This number must match the port
number that is specified in the Routing Control File used by the MVS