Customizing A Notification Server Error Log; Sample Spl_Error.cfg File Provided By Infoprint Manager - Ricoh InfoPrint Pro C900AFP Manual

#
# ErrorLog Configuration File
#
# Log size (units = KBytes)
log-size = 1024
# Wrap On?
log-wrap = true
# Severity?
log-severity = debug
# Number of backup log files
log-backup-number = 10
Figure 1. Sample spl_error.cfg file provided by InfoPrint Manager
4. Once you have finished defining your options, save and close the file.
5. To shut down the server from the Management Console, specify File → Stop
6. To restart the server from the Management Console, specify File → Start server.

Customizing a Notification server error log

By default, the Notification server error log starts when the Notification server
starts. Use this procedure to customize the InfoPrint Notification server error log.
1. Find the notifyd_error.cfg file in the bin directory that is under the directory
2. Copy it to the workspace_path directory.
3. From the workspace_path directory, edit the notifyd_error.cfg file to specify the
34
InfoPrint Manager for Windows: Procedures
When you start the InfoPrint Manager server after a shut down, it backs up the
first error log by creating an error.log.BAK file. With each successive restart, it
creates an additional .BAK file, adding a timestamp as a fourth qualifier. By
default, the log-backup-number attribute specifies a value of 10, meaning that
you can have nine back up files with timestamps and the initial .BAK file. You
can reduce this number as low as 1 or increase it as high as 999.
For a complete list of the error log attributes that you can customize, see the
InfoPrint Manager: Reference "Attributes for logs" topic in "Chapter 3. InfoPrint
object attributes."
Note: If you do not need the customization change to take effect immediately,
you can skip the final two steps and just wait until the next time the InfoPrint
Manager server is restarted.
server.
where the file is installed.
The workspace_path is specified on the Workspace path field. From the InfoPrint
Manager Management Console, click Edit → Service Configuration path to
verify the setting of the Workspace path field. For these examples,
workspace_path signifies the fully qualified path where the error log is in, such
as C:\Program Files\IBM\Infoprint Manager\var\pd.
Note: If you already customize your Notification server error log, remember to
change the name or move the current notifyd_error.cfg file in workspace_path so
that your customization values can be copied over into the newer version of
the file.
settings for the log attributes that you want (as shown in Figure 2 on page 35).
For example, you can modify the log-backup-number attribute, which lets you
specify the number of backup logs that InfoPrint saves, including the initial
error.log.BAK file. Before the log-backup-number attribute was added,