Changing Device Information - Ricoh InfoPrint Pro C900AFP Manual

v device-media-supported
v device-model
v device-op-panel-locked
v device-output-bins
v device-printer-name
v device-ready-media
v device-serial-number
v device-state
v device-version
This is the list of settable device-specific actual destination attributes:
v device-contact
v device-location
Note:
1. Not all printers report all these attributes.
2. The information returned is not translated.
The InfoPrint Manager Administration Interface can launch a Status window that
displays information returned from SNMP. The window lets you see a detailed
view of the status of an SNMP printer. It includes a graphic representation of the
printer and its current status, such as whether it has a paper jam or a door open.
To see the Status window from the InfoPrint Manager Administration Interface:
1. Select an SNMP printer.
2. Click Check Status.
3. Click More Information.
You can use the pdls command to access SNMP device information with the -r
flag, such as output-bins, like this:
pdls -c destination -r device-output-bins prt5-ad
Note: You can filter for specific device information with the -f flag.
You can also use the pdls command to access all the information for an SNMP
device by specifying the -r flag with the all-device value.
For more information about the pdls command, see the "InfoPrint Manager Tools"
chapter in the InfoPrint Manager: Reference.

Changing device information

You can use the InfoPrint Manager Administration GUI, the pddeviceop command,
and the pdset command to change information for SNMP devices.
The value of the snmp-active actual destination attribute must be true, and the
printer device associated with the actual destination must support the operation.
You must have write permission to the actual destination, and depending on the
SNMP version that you use, the snmp-write-community-name (V1) or the
snmpv3-username (V3) actual destionation attributes must be set properly for the
pddeviceop command or GUI commands to work.
52
InfoPrint Manager for Windows: Procedures