Creating And Using Your Own Psf Dss User-Exit Programs; Compiling And Installing The User-Exit Program; Activating The User-Exit Program - Ricoh InfoPrint Pro C900AFP Manual

Creating and using your own PSF DSS user-exit programs

You can create your own PSF DSS user-exit program at any time; however, you
must perform additional tasks to produce a PSF DSS user-exit executable program.
You must have the Microsoft
InfoPrint Windows server to compile and build user-exit programs. Be sure to
apply the latest service available.
You can create your own user-exit program in one of these ways:
v Copy one of the sample user-exit programs, rename it, and modify it using the
v Write your own user-exit program. You can include the variable data shown in
ICONV:
If you have written any user-exit programs that use ICONV, you must alter them
to use UCONV instead. For more information, see the InfoPrint Manager: Reference.

Compiling and installing the user-exit program

You can only specify one user-exit program for each function name provided by
InfoPrint per actual destination.
The function name of the user exit must be one of these (in uppercase), because
that is the entry point in the module:
v ACCOUNTING
v AUDIT
v JOBCOMPLETION
v HEADER
v SEPARATOR
v TRAILER
v INDATA
v OUTDATA

Activating the user-exit program

Before you can use the new user-exit program, you must activate the program.
To perform this task from the command line, click the Windows Start button and
select Programs → Command Prompt and complete these steps:
1. Enter this command: pdls -c aux -r all servername:, where servername refers
2. Use the pdset command to change the values of any of the auxiliary sheet
70
InfoPrint Manager for Windows: Procedures
Microsoft Visual Studio 2005 Program.
these sections, for example, USERID; but InfoPrint cannot process variable data
that is not shown in this section.
to the name of the server you are using.
This command displays the attributes for all current auxiliary sheet objects
available on the server. You can also view attributes for a specific auxiliary
sheet object. For example, to view attributes for the accounting log, enter this
command: pdls -c aux -r all servername:accounting-log
objects, as necessary.
®
Visual Studio 2005 Program installed on your