Changing The Hostname Of A Non-Namespace Server - Ricoh InfoPrint Pro C900AFP Manual

4. In the Management Console, click Edit → Changed Hostname.
5. In the Changed Hostname dialog, enter the new hostname. Names are
6. When the system asks, restart the system so the changes take effect.
7. Update all of the client systems that communicated with the server using the
8. Update any InfoPrint Manager Security ACLs or groups that reference IDs

Changing the hostname of a non-namespace server

Follow this procedure only if you are running both InfoPrint Manager for AIX and
InfoPrint Manager for Windows as interoperating print servers and need to change
the hostname of the system that InfoPrint Manager for Windows is running on.
42
InfoPrint Manager for Windows: Procedures
Note: If you have already changed the hostname/IP address of your system,
you do not have to change them again. Continue with step 4.
case-sensitive. Make sure the new hostname that you type exactly matches the
one on your Windows system and click OK.
old hostname/IP address to use the new one, including:
v InfoPrint Select clients
v InfoPrint Manager Administration GUI
v InfoPrint Manager Operations GUI
v Windows gateway printers
v IPP Gateway clients
v InfoPrint Manager Notifications clients
using the old hostname. In addition, if you changed any members of the
acl_admin group in step 2, change the wildcard character to the new hostname.
1. Complete "Changing the server hostname and IP address" on page 41 on the
non-namespace server. At the end of the procedure, the InfoPrint Manager for
Windows server should be stopped and can no longer access the namespace
on the AIX machine.
2. On the system that InfoPrint Manager for Windows runs on, disconnect the
network drive that was mapped to the namespace on the AIX machine.
3. Log on to AIX server machine as root.
4. Follow this path: Smitty → InfoPrint Printing System → InfoPrint Utilities →
Configure Secondary Servers (NFS) → Link from Primary Server to
Secondary Server
5. In the dialog that appears:
a. Type the new hostname in the Secondary Server Host Name field.
b. Type the new server IP address in the Secondary Server IP Address field.
c. For Is /ipdata used for job ticketing? answer:
v Yes if you use /ipdata with InfoPrint Submit.
v No if you do not.
d. For Retain secondary servers previously defined? answer Yes.
6. On the Windows server machine, remap the network drive to the
\\aixserver\var\pddir\default_cell filesystem using the same drive letter
that you used for the network drive that you disconnected in step 2. Map the
drive using the same user id and password that you used during the initial
multiserver environment setup.
7. Log on to the AIX server machine as root.
8. Stop the InfoPrint Manager for AIX server.