DSP Load
If more than one UAD DSP is installed, information for each of the processors
is displayed. DSP, Program ("PGM"), and Memory ("MEM") loads are dis-
played as a percentage of total available load for that processor.
The number of UAD plug-ins ("PLG") running on each individual processor is
also displayed (not available for UAD-1).
Clicking this button will generate a detailed system profile and prompt you for
Save Detailed
System Profile
a location to save the text file to disk. This file contains an even greater level
of detail than the System Information panel, which can be useful for trouble-
shooting or if UA Customer Support requests this document when providing
assistance.
The profile lists the version strings of the individual UAD software compo-
nents, installed device type(s) with serial and hardware ID numbers, host com-
puter information, and detailed authorization status for all UAD plug-ins.
Plug-Ins Panel
The Plug-Ins panel
status of all UAD plug-ins. This is also where you can activate plug-in Demo
Mode
a specific device. Use the scrollbar to view plug-ins that are not visible in the
list.
Authorize
Plug-ins button
your UAD plug-ins. If you do not already have an account, you are redirected
to the registration page to create one.
Important:
detailed information, see
thorization, UAD plug-ins can be enabled to run for 14 days without func-
tional limitations in a timed demo mode (see
The complete procedure for UAD device authorization is detailed in
Chapter 2, "UAD Installation."
page 33
connected to the internet, see
UAD Powered Plug-Ins Manual
(Figure 11 on page
("UA Online Store" on page
UAD plug-ins require authorization before they can be used. For
"Authorization Overview" on page
for complete step-by-step instructions. If the UAD computer is not
70) displays the current authorization
52) and configure UAD plug-ins to run on
This important button links directly to your ac-
count at the UA online store to automatically gen-
erate and download an authorization file for
"Demo Mode" on page
See
"Authorize Plug-Ins Procedure" on
"" on page
34.
- 68 -
Chapter 6: UAD Meter & Control Panel
48. Without au-
51).