Table of Contents
Advertisement
Figure 72. DreamVerb Resonance panel
The equalizer can be disabled with this switch. When the switch is off (black
Bypass
instead of grey), the other resonance controls have no effect. This switch has
no effect on the direct signal path.
Band Amplitude
Each of the five bands has its own amplitude (gain) control. The amplitude
range of each band is –30 dB to +20 dB.
To adjust the amplitude of bands 2, 3, and 4, grab the control bat for the band
and drag vertically or use the direct text entry method. For bands 1 and 5,
drag the horizontal line (these do not have a control bat).
Bands 2, 3, and 4 have an Edge control. This parameter effects the band-
Band Edge
width of the band. To adjust the band edge, grab its control bat and drag hor-
izontally or use the direct text entry method.
The effect of the band edge on the filter sound can depend upon the settings
of the adjacent bands. For example, the sonic effect of this parameter is more
pronounced if the amplitude of adjacent bands is significantly different than
that of the band whose edge is being adjusted.
UAD Powered Plug-Ins Manual
Bypass switch
Band 1 (low
shelving) control
Band Amplitude
Band 2, 3, and 4
Edge control bats
- 206 -
control bats
Band 5 (high
shelving) control
Chapter 17: DreamVerb
Advertisement
Table of Contents
