Important Uad-2 Satellite Notes - Universal Audio UAD User Manual

Powered plug-ins software version 6.1
Table of Contents

Advertisement

System Sleep
System sleep while UAD-2 Satellite is active is not supported. Before sleeping
the system, quit all plug-in host applications (including the UAD Meter & Con-
trol Panel) and disconnect UAD-2 Satellite. After wake, UAD-2 Satellite may
be reconnected.
Important:
sleep.

Important UAD-2 Satellite Notes

For maximum system stability and reduced possibility of data loss, please ob-
serve these requirements when operating UAD-2 Satellite:
• Due to differing architectures,
• UAD-2 Satellite has a minimum hardware buffer requirement of 256 sam-
• All devices on the FireWire bus share the available data bandwidth of the
• All three FireWire ports on UAD-2 Satellite may be used concurrently as a
• See
UAD Powered Plug-Ins Manual
Quit all hosts and disconnect UAD-2 Satellite before system
when UAD-2 Satellite is connected. LiveTrack Mode is also unavailable with
UAD-2 PCIe cards when UAD-2 Satellite is connected to the same system as
the card(s).
ples. The hardware buffer setting for the host and audio interface can be ad-
justed when UAD-2 Satellite is connected, and the UAD-2 Satellite drivers
dynamically adjust to allow for the lower buffer setting while still maintain-
ing UAD-2 Satellite's minimum buffer requirement of 256 samples.
Note:
For the lowest latency while tracking, disable any plug-ins currently
running on UAD-2 Satellite from the input tracks and the monitoring and/or
master output paths.
bus, including external hard drives and audio interfaces as well as UAD
plug-ins. The amount of UAD DSP that is available for UAD plug-in process-
ing can exceed the available FireWire bandwidth. For these reasons, the
value of the
"UAD Bandwidth Allocation" on page 80
"FireWire Bandwidth" on page 141
DSP" on page 143
FireWire hub, however FireWire bus power is not supplied to downstream
devices. See
"Bus Power" on page 137
"Mixing FireWire Speeds" on page 140
about using FireWire 800 and FireWire 400 devices on the same bus.
"LiveTrack Mode" on page 89
and
for more details.
- 135 -
setting is critical. See
"FireWire Bandwidth vs. UAD
for details.
for important information
Chapter 11: UAD-2 Satellite
is unavailable

Advertisement

Table of Contents
loading

Related Products for Universal Audio UAD

This manual is also suitable for:

Uad powered plug-ins

Table of Contents