Table of Contents
Advertisement
LFO Type Menu
Determines the LFO (low frequency oscillator) waveshape and phase used to
modulate the signal. The waveshape can be set to triangle or sine, each with
varying duty cycles and phases.
Table 29. Phasor LFO Types and Descriptions
Order Menu
Determines the filter order for the Phasor filter banks. This setting affects the
tonal complexity of the Phasor. Higher Order filters are more detailed than
lower Order filters. Ten filter Order values are available, 3 through 12.
Enables or disables the Phasor module.You can use this switch to compare the
Phasor On/Off
Button
Phasor settings to that of the original signal or bypass the Phasor to reduce
UAD DSP load.
UAD Powered Plug-Ins Manual
Sin
Pure sine wave.
Sin 2
Modified sine wave that stays high longer.
Sin 3
Modified sine wave that stays low longer.
Square
Square wave.
Square 2
Modified square wave that stays high longer.
Square 3
Modified square wave that stays low longer.
Sin 180
Sine wave 180 degrees out of phase.
Square 180
Square wave 180 degrees out of phase.
- 406 -
Chapter 38: Nigel
Advertisement
Table of Contents
