Table of Contents
Advertisement
EQ Display
In the EQ Display, the entire audio spectrum from 20 Hz to 20 kHz is dis-
played along the horizontal axis. Gain and attenuation of the five band fre-
quencies (up to ±12 dB) are displayed along the vertical axis.
Figure 149. Precision Multiband EQ Display
Band Curves
The Band Curves show the relative frequency and gain settings of the bands.
The sides of the colored curves are a representation of each band's frequency
settings, and the top of each curve represents the band's gain setting.
Note:
abled bands (see
thinner line.
The EQ Display also shows the processed EQ response dynamically as a light
EQ Response
blue line across all bands (if the Dynamic EQ display option is enabled; see
"EQ Display Switch" on page
Curve Control
Band gain, center frequencies (cF), crossover frequencies (xF), and band-
Points
width can be modified by manipulating the colored band curves in the EQ
Display with the cursor.
When the cursor is moved over the pre-defined "hot spots" in the EQ Display,
the cursor changes shape to indicate that adjustments can be made. Each of
these control points and their corresponding available adjustments are de-
tailed below.
UAD Powered Plug-Ins Manual
The currently selected band is displayed with a thicker bold line. Dis-
"Band Enable & Solo" on page
473).
- 468 -
467) are displayed with a
Chapter 46: Precision Multiband
Advertisement
Table of Contents
