Universal Audio UAD User Manual page 318

Note:
trary and do not reflect a particular frequency value.
The two Center switches define the active center frequency
Center
of the effect, which in turn determines the available fre-
quency range. The four available center frequencies, and
resulting frequency ranges, are shown in
A switch is "ON" when its LED is red. A green LED indi-
cates the switch is "OFF."
Table 23. Center Switch Frequency Values
"40" Button LED
The EQ circuitry is bypassed when Flat is enabled (red
Flat
LED); the circuit is active when Flat is disabled (green LED).
When Flat is on, the dry signal path of the hardware is still
being modeled and DSP is used. For true bypass, use the Power switch.
Power
page 74
the original signal.
UAD Powered Plug-Ins Manual
The control values for Frequency, which range from 0 – 10, are arbi-
"100" Button LED
Green Green
Red Green
Green Red
Red Red
Power is the plug-in bypass control. When set to OFF,
emulation processing is disabled, the LEDs are dimmed,
and DSP usage is reduced (if
is disabled). Power is useful for comparing the processed settings to
The Little Labs VOG
hardware unit
Table 23
Center Frequency (Hz)
40
42
100
200
- 318 -
below.
Frequency Range (Hz)
18 – 60
20 – 62
50 – 180
100 – 305
"UAD-2 DSP LoadLock" on
Chapter 29: Little Labs VOG