Table of Contents
Advertisement
Low Pass (high cut)
This control determines the cutoff frequency for the low pass filter. The avail-
able range is 1.6 kHz to 20 kHz.
Four EQ Bands
Low Peak
always operate in peak mode).
This control determines the low band center frequency (or the edge frequency
Low Frequency
when in shelf mode) to be boosted or attenuated by the band Gain setting.
The available range is 40 Hz to 600 Hz.
Low Gain
This control determines the amount by which the frequency setting for the low
band is boosted or attenuated. The available range is ±10 dB.
Low Mid
This control determines the low midrange band center frequency to be
Frequency
boosted or attenuated by the band Gain setting. The available range is 200
Hz to 3.1kHz.
This control determines the amount by which the frequency setting for the low
Low Mid Gain
midrange band is boosted or attenuated. The available range is ±10 dB.
High Mid
This control determines the low midrange band center frequency to be
Frequency
boosted or attenuated by the band Gain setting. The available range is 400
Hz to 6 kHz.
This control determines the amount by which the frequency setting for the high
High Mid Gain
midrange band is boosted or attenuated. The available range is ±10 dB.
Hi Frequency
This control determines the high band center frequency to be boosted or at-
tenuated by the band Gain setting. The available range is 900 Hz to 13 kHz.
UAD Powered Plug-Ins Manual
The low EQ band can be operated in either peak or shelf mode.
When the Low Peak switch is in the "out" position, the low EQ band
operates in shelf mode. When the Low Peak switch is engaged
(darker), the low EQ band operates in peak mode (the other bands
Each of the four EQ bands have
similar controls. The band center
frequency is controlled the top
row of knobs, and the band gain
is controlled by the bottom row.
- 272 -
Chapter 23: Harrison 32C EQ
Advertisement
Table of Contents
