Universal Audio UAD User Manual page 67

Powered plug-ins software version 6.1
Table of Contents

Advertisement

UAD-2: The displayed latency is the audio I/O interface buffer size when Extra
Buffering
is the audio I/O interface buffer size plus 64 samples.
UAD-1: The displayed latency is twice the audio I/O interface buffer size.
Note:
ples produced by upsampled UAD plug-ins. For more detailed information
about the extra samples and latency, see
Plug-Ins" on page
Hardware
Detailed information about each UAD device and its DSP is displayed in the
Section
Hardware area
stalled, use the scrollbar to see the other devices.
For each installed device type (UAD-2 and UAD-1), a small picture of the
Device Status
hardware and its status is displayed. When the device displays Status: OK
the hardware is operating properly. The total number of UAD plug-ins loaded
on each device is also displayed here.
Device Enabled
vices, to streamline the performance of the host system when multiple devices
are not needed, or to manually balance loads on UAD-1-only multidevice sys-
tems.
Devices remain disabled only while the UAD Meter & Control Panel applica-
tion is open. When the UAD Meter & Control Panel is quit, disabled devices
are re-enabled.
Note:
vice; it only prevents additional plug-ins from being loaded onto it.
Important:
plug-ins before disabling/enabling devices.
UAD Powered Plug-Ins Manual
(page
74) is off. When Extra Buffering is on, the displayed latency
The displayed sample latency number does not include the extra sam-
108.
(Figure 10 on page
Individual UAD devices can be disabled using the Device Enabled but-
ton. This can be useful, for example, if creating a session on a system
with multiple devices that will be transferred to a system with fewer de-
Click the button to disable an individual device. The device is en-
abled when the button is blue. For additional information regarding
multidevice use, see
Disabling devices does not disable plug-ins already running on the de-
For optimum results, quit any host applications using UAD
"Compensating Upsampled
66). If you have several devices in-
Chapter 5, "Using Multiple UAD Devices."
- 67 -
Chapter 6: UAD Meter & Control Panel

Advertisement

Table of Contents
loading

Related Products for Universal Audio UAD

This manual is also suitable for:

Uad powered plug-ins

Table of Contents