Table of Contents
Advertisement
Late-Field
To highlight the relative timing relationship between the early reflections and
Relative Timing
late-field reverberation components, the shape and timing of the late-field is
represented as an outline in the Reflections panel. The shape of this outline is
modified by parameters in the Reverberations panel, not the Reflections
panel.
Reverberation Panel
The Reverberation panel
late-field (LF) reverb tail for DreamVerb.
The primary spectral characteristics of the late-field reverberation are deter-
mined by the parameters in the Materials panel
with the Reverberation panel settings.
Note:
the bottom of the Reverberations panel. These values can also be entered di-
rectly using the text entry method.
Bypass
switch
Early reflections
relative timing
display
Late-field
start time
control bat
Figure 77. DreamVerb Reverberation panel
The late-field reverberations can be disabled with this switch. When the
Bypass
switch is off (black instead of grey), the other Reflections controls have no ef-
fect. This switch has no effect on the direct signal path.
UAD Powered Plug-Ins Manual
(Figure
The values for the late-field controls are displayed in the text fields at
77) contains the parameters that control the
(page
- 213 -
209) in conjunction
Amplitude
and Slope
control bat
Diffusion
control
Decay Time
control bat
Chapter 17: DreamVerb
Advertisement
Table of Contents
