Precision Multiband Interface - Universal Audio UAD User Manual

Precision Multiband Interface

The Precision Multiband interface is designed to make this complex processor
easier to use.
Five separate frequency bands are available for processing. Each band is
identified by a unique color, and all controls specific to the band have the
same color. This helps to visually associate parameters to the band that they
affect. The band names and their colors are:
• Low Frequency (LF): Red
• Low-Mid Frequency (LMF): Orange
• Mid Frequency (MF): Yellow
• High-Mid Frequency (HMF): Green
• High Frequency (HF): Blue
The interface is divided into four primary areas of control:
• The Band Controls section contains the dynamic response parameters for
• The EQ Display contains the band frequency parameters and shows a
• The Dynamics Meters display the amount of gain reduction or expansion oc-
• The Global controls affect aspects of the plug-in not associated with individ-
UAD Powered Plug-Ins Manual
each of the five bands. One set of band controls is displayed at a time. See
"Band Controls" on page
graphic representation of the band frequency response. The overall equal-
ization response is also displayed (if enabled). See
page 468.
curring on each band. The band enable and solo controls are here also.
See "Dynamics Meters" on page
ual bands. These include input/output controls and meters, power, and
other controls. See
463.
471.
"Global Controls" on page
- 462 -
"EQ Display" on
472.
Chapter 46: Precision Multiband