Table of Contents
Advertisement
Output Gain
Meter Buttons
VU Meter
Power
page 74
WebZine Articles
Some interesting technical articles are available in our online Webzine at
www.uaudio.com:
Ask the Doctors: Signal Detection in the dbx 160
• http://www.uaudio.com/webzine/2008/march/index2.html
Analog Obsession: David Blackmer and the dbx 160
• http://www.uaudio.com/webzine/2008/march/index4.html
Ask the Doctors: VCA Compressors
• http://www.uaudio.com/webzine/2007/december/index2.html
UAD Powered Plug-Ins Manual
Output Gain controls the signal level that is output from the
plug-in. The available range is ±20 dB.
Generally speaking, adjust the Output control after the de-
sired amount of compression is achieved with the Threshold
and Compression controls. Output does not affect the
amount of compression.
The Meter buttons define the mode of the VU Meter.
The buttons do not change the sound of the signal
processor. The active button has a darker appear-
ance when compared to the inactive buttons.
The Power switch determines whether the plug-in is active. Click the
button to toggle the state. When the Power switch is in the Off
(lighter) position, plug-in processing is disabled and UAD DSP us-
age is reduced (load is not reduced if
is enabled).
When set to Input, the VU Meter indicates the
plug-in input level in dB. When set to Output,
the VU Meter indicates the plug-in output level
in dB. When set to Gain Change, the VU Meter
indicates the amount of Gain Reduction in dB.
"UAD-2 DSP LoadLock" on
- 202 -
Chapter 16: dbx 160 Compressor/Limiter
Advertisement
Table of Contents
