Table of Contents
Advertisement
2.
3.
4.
UAD-Xpander disconnection is complete.
Figure 26. ExpressCard Power Down (Windows)
Figure 27. ExpressCard Power Down (Mac)
Reconnect
Once the UAD-Xpander has been disconnected for any reason, the computer
must be rebooted with the UAD-Xpander connected. Follow the
quence" on page 124
System Sleep
Windows
System Sleep (hibernate) is not supported when using UAD-Xpander under
Windows. Sleep should be disabled while the UAD-Xpander is connected.
UAD Powered Plug-Ins Manual
Power down the ExpressCard, using the following method as defined by
the operating system:
• (Windows) In the Windows Task Bar, click the Safely Remove Hardware
icon, and select "Safely remove Universal Audio UAD-1 DSP card"
(Figure 26 on page
• (Mac) In the Menu Bar, click the ExpressCard status menu icon, and select
"Power off Card"
(Figure 27 on page
Turn off the power switch on the back of the UAD-Xpander.
Remove the UAD ExpressCard from the expansion slot.
126).
126)
for reconnection instructions.
- 126 -
"Startup Se-
Chapter 10: UAD ExpressCard Products
Advertisement
Table of Contents
