Clutch Cable; Removal - Triumph Rocket III Service Manual

Clutch Cable
Removal
Before starting work, ensure the motorcycle is
stabilised and adequately supported. This will help
prevent it from falling and causing injury to the
operator or damage to the motorcycle.
1. Remove the rider's seat as described on page
17.9.
2. Disconnect the battery, negative (black) lead first.
3. Slacken the cable locknut and release the
adjuster at the engine end to give maximum play
in the cable.
1. Clutch Cable
2. Adjuster
Clutch
4. Release the clutch cable from the actuating arm
by pushing the inner cable nipple through the
arm and sliding the cable out. Detach the cable
from the bracket.
1. Actuating Arm
2. Inner Cable
5. Align the slots in the lever adjuster and locknut.
1. Locknut
2. Lever adjuster
Service Manual- Rocket III
4.5