Triumph Rocket III Service Manual page 394

Frame and Bodywork
5. Pivot the mudguard upwards at the rear and
engage the two M6 x 16 mm fixings through the
frame and into the mudguard.
1.
Fixings
6. Tighten the fixings to 14 Nm.
7. Position the mudguard covers, engaging their
forward edges to the grommets.
1. Cover
2.
Grommet
8. Fit the mudguard cover fixings. Tighten the M8
fixings to 26 Nm and the M1 0 fixings to 64 Nm.
1. MS
fixing
2. M10
fiXing
9.
Reconnect the rear light, number plate light and
indicators.
10. Reconnect the battery, positive (red) lead first.
11. Check that the rear light, number plate light and
indicators all function correctly.
12. Refit the side covers as described on page 17.9.
13. Refit the seats as described on page 17.9.
17.14
Service Manual - Rocket III