Triumph Rocket III Service Manual page 253

7. Pivot the fuel tank upwards at the front, support
the tank while detaching the tank prop from two
clips on the outside of the coil bracket.
1. Coil bracket
2. Fuel tank prop
8. Locate the plain end of the prop in the fuel tank
fixing hole and the spherical end in the fixing
bracket on the tank.
1. Fuel tank fixing hole
2. Prop - plain end
3. Prop- ball end
Fuel System/Engine Management
Fuel tank - lowering and securing
1. Support the tank and remove the tank prop.
2. Continue to support the tank while refitting the
prop to the two clips on the outside side of the
coil bracket.
"-...~~~e
~~~
I
1. Coil bracket
2. Fuel tank prop
3. Lower the tank into position and secure with the
forward fixing. Tighten the fixing to 9 Nm.
4. Refit the intake cover as follows; align the cover
to the centre studs and ease it into place. Fit and
tighten the two screws to 9 Nm.
5. Pivot the instruments into place. Fit the two
screws and tighten to 3 Nm.
6. Reconnect the battery, positive (red) lead first.
7. Refit the rider's seat as described on page 17.9.
Service Manual - Rocket
III
11.99