Inspection; Assembly - Triumph Rocket III Service Manual

Front Suspension
15. Remove the circlip from above the seal.
1.
Circlip
16. Note the orientation of the seal lip then, using a
soft-faced drift, remove the seal and collect the
washer from below it.
1. Seal removal
Inspection
1. Inspect the inner tube for stone chips, scoring,
scratches, excessive wear and any other
damage. Renew the inner tUbe if necessary.
2. Inspect the spring for damage, cracks and
deformation. Renew the spring if necessary.
3. Inspect all bushes and seals for damage. Renew
any damaged items if necessary.
Assembly
The front forks comprise many precision machined
parts. Total cleanliness must be observed at all
times and, assembly must take place in a dirtldust-
free environment. All parts must be washed in non-
flammable solvent before assembly. Dirt ingress
may cause damage to the fork parts, leading to,
instability, loss of motorcycle control and an
accident.
Note:
• If the damper has not been removed, omit
operations 6 and 7.
1. Apply a smear of fork oil to the bushes and seals.
2. Fit the washer to the seal recess in the outer
tube.
1. Outer tube
2. Washer
14.12
Service Manual - Rocket III