Triumph Rocket III Service Manual page 331

3. Position the seal as noted prior to removal, then
position it to the outer tube and drift into place
using tool 3880080-T0301. Retain the seal with a
new circlip.
1. Seal
2. Tool 3880080·T0301
4. Refit the dust seal, using finger pressure only.
ob,,,
1. Dust seal
2. Outer tube
Front Suspension
5. Carefully fit the outer tube to the inner ensuring
that the oil and dust seal lips do not become
damaged.
1. Inner tube
2. Outer tube
6. Fit the damper to the inner tube and engage tool
3880090-T0301 to the damper cup (as for
removal).
7. Clean the threads of the damping cylinder bolt
and fit a new sealing washer. Apply a drop of
three-bond 1342 to the threads then install the
bolt. Prevent the cylinder from turning by holding
the hexagonal end of tool 3880090·T0301 while
tightening the damping cylinder bolt to 45 Nm.
1. Tool 3880090·T0301
2. Cylinder
The damping rod locknut must be fitted with the flat
side facing to the top of the fork. The slightly
tapered side must face the fork spring.
Incorrect orientation may lead to a loosening of the
locknut.
~.
Service Manual - Rocket
III
14.13